ProJet
®
x60 Series User Guide ProJet x60 Series Overview
3dscentral.3dsystems.com 16 All Rights Reserved
5/12/13
1.10 LCD Menu Overview - ProJet 460Plus
1.11 Where To Go For More Information
Quick Start Guide A Quick Reference Guide is included on the 3DPrint Installation media (typically a
USB memory stick) that accompanied your printer. It has pictures and simple, step-by-step instructions to
guide you through a print job. Additional copies are available on our Web site at
3dscentral.3dsystems.com.
Software User Manual A User Manual for the 3DPrint Software is supplied on the Installation media
(typically a USB memory stick) with the software. Additional copies are available on our Web site at
3dscentral.3dsystems.com.
Post-Processing Learn more about the different post-processing products that are available to use with
your printer, on the Materials section of our User Web site at 3dscentral.3dsystems.com.
Consumables To order consumables/materials, contact your local Service Provider or Reseller.
1.12 Contact 3D Systems
If you have any questions about your 3D Printer or the 3DPrint Software, please contact your local
Reseller/Service Provider. If they are unable to help, contact us directly.
Main Menu
VACUUM/CLEANING
PREP BUILD CHAMBER
STATUS REPORT
PRINTHEADS >
BUILD CHAMBER >
GO ONLINE
Printhead Submenu
MAIN MENU >
CHANGE PRINTHEADS
FILL BED & PRINT BLOCK
PRINT BLOCK ONLY
PURGE HP11 PRINTHEAD
Build Chamber Submenu
MAIN MENU >
RAISE PLATFORM
LOWER PLATFORM
SPREAD LAYER
FILL BED
CONTROL ROLLER
United States
Corporate Headquarters:
333 Three D Systems Circle
Rock Hill, SC 29730
Tel: +1.803.326.3900
Technical Support - Europe/Middle East/
Africa
Phone: +49 6151 357245
E-mail: support-emea@3dsystems.com
Technical Support – North and South
America
Phone: +1 877-889-2677
+1 978-494-8240
E-mail: support-us@3dsystems.com
Technical Support – Asia Pacific
Phone: +852 8191 2453
FAX: +852 2948 2244
E-mail: support-apac@3dsystems.com
To Next Page
Loading...
Need help?
General
