ProJet
®
x60 Series User Guide Troubleshooting the ProJet x60 Printers
3dscentral.3dsystems.com 51 All Rights Reserved
5/12/13
7.3.2 Troubleshoot Print Head/Weak Parts
If your printer is reporting print head errors, or is building parts that break too easily, follow the flowchart
below. Also see Section 7.8, ’Part Quality Issues Streaky/Striped Parts, Delamination, Weak Parts’.
How to do it
To remove the printhead and clean the pogo pins, follow the steps in Section 5.3, ’Change Print Head’.
To Next Page
Loading...
