3M MS2 - Page 15

15
5.5.4 Preterminated Super-Mate Plugged to
Preterminated Super-Mini
Note: A stripped splice head may be used.
5.5.5 Preterminated Super-Mate Plugged to
Preterminated Super-Mate
Note: A stripped splice head may be used.
Note: If a Super-Mini Module is used, it must always be on the bottom of the final configuration.
Note: It is recommended that only one module combination should be plugged together at a time.
Cover
Body
Super-Mate
4005-DPM
(without insulator)
Body
Base
Super-Mini
4000-D
(without cover)
Cover
Body
Super-Mate
4005-DPM
(without insulator)
Body
Base
Insulator
843054
843054
Super-Mini
4005-DPM
(without cover)
4270-A Hand Presser 4255 Hand Presser
4270-A Hand Presser 4255 Hand Presser
5.5.7 Preterminated Super-Mate Module Combination, Plugged to Preterminated Super-Mate or Super-Mini
Module Combination.
Any two module combination from two single modules to a total of seven modules may be plugged togeth-
er. Only a combination of up to three modules may be done in a stripped splice head.
*
*
Can be either a Super-Mini Module or a Super-Mate Module with Insulator
842795
5.5.6 Three Super-Mate Modules
(3 Conductor Splice)
Note: A stripped splice head may be used.
Cover
Body
Super-Mate
4005-DPM
(wlithout insulator)
843055
Body
Insulator
Super-Mini
4005-DPM
(without cover)
Body
Super-Mate
4005-DPM
(body only)
4270-A Hand Presser