5
LOW BATTERY WARNING:
Press and hold power button for 3 seconds to power
ON/OFF headset. Voice Assist will announce "Power ON" or
"Power OFF." Voice Assist will also provide a battery status
update – “Battery High,” “Battery Medium,” “Battery Low,” or
“Battery Empty.” Adjust the volume using your connected
device.
Press and hold power button for 3 seconds to power
ON/OFF headset. Voice Assist will announce "Power ON" or
"Power OFF." Voice Assist will also provide a battery status
update – “Battery High,” “Battery Medium,” “Battery Low,” or
“Battery Empty.” Adjust the volume using your connected
device.
AUTO SHUT OFF:
Bluetooth
®
Operations
PAIRING THE DEVICE:
5 minutes after either Bluetooth or the audio input is
disconnected, the hearing protector will automatically power
down. To reset auto shut-off, simply press the button on the
right cup once. After auto shut-off, press and hold the
ON/OFF button for 3 seconds to turn back on.
Once powered on, double press the button on the hearing
protector’s right cup to enter pairing mode. You will hear
"Bluetooth Pairing ON." Make sure your Bluetooth
®
enabled
device is scanning/searching for devices. Check your device
to make sure it has discovered "WorkTunes Connect."
Select "WorkTunes Connect" to connect to the hearing
protector. Once connected successfully, you will hear
"Bluetooth Connected" and the LED on the right cup will turn
blue.
Your Bluetooth
®
audio volume will be controlled by your
device.
The next time you power up, your hearing protector will
automatically connect to your device and say "Bluetooth
Connected."
FORWARD/BACK OR PAUSE/PLAY*
To pause or play audio on your device, you can single press
the button on the right cup.
To advance tracks, double press the button.
To select the previous track, triple press the button.
*Some devices may not be compatible with this feature and
will have to be operated using their native controls.
INCOMING CALLS
In Bluetooth
®
Mode, incoming phone calls will cause the
music to be muted and you will hear your phone's ringtone
until the call has ended.
To answer an incoming call, press the button on the hearing
protector once.
To disconnect from a call, press the button once more. After
disconnecting from the call, you will hear “Call Terminated.”
To reject a call and return to Bluetooth
®
audio, press and
hold the button. After rejecting a call you will hear “Call
Terminated.”