Using Feature Access Codes
Feature Access Codes are short cuts to built-in features on your Aastra telephone.
You can use Feature Access Codes to manage your incoming and outgoing calls and voice
messages. To manage calls using Feature Access Codes, pick up the handset and press the star key
(*), the corresponding number in the table below, and then press Dial:
Allows you to answer a second incoming call while remaining on the
first call. Activates or deactivates the service for all calls. Press *70 then
Dial to turn off only the last incoming number.
Allows you to place a call on hold at one phone and pick up the call on
another phone. Parks the call until you retrieve the call.
Redials last incoming phone number.
Allows you to ignore the incoming call. Sends incoming call to voice
mail.
Priority Call
(Diversion Inhibitor)
Prevents the redirected call from being redirected again by the called
party. Overrides a line that is on Call Forward.
Allows you to answer a ringing call from a specified extension.
Connects you to the longest ringing phone in your call pickup group.
Clear Call Message
Waiting Indicator
(MWI)
Clears message indicator lamp on your phone.
Enter phone number where calls should be sent. Call Forwarding
Always allows you to forward all your incoming calls to a different
phone number, such as your home office or cell phone.
Call Forwarding
Always to Voice
Mail
Calls are sent to your voice mail.
Enter phone number where calls should be sent. Call Forwarding Busy
allows you to forward all your incoming calls to a different phone
number if your phone is currently busy. Use this service when you
would rather have a secretary or co-worker receive the call instead of
the caller being sent to your voice mail.
Call Forwarding
Busy to Voice Mail
Missed calls are forwarded to your voice mail.
Call Forwarding No
Answer
Enter phone number where calls should be sent. Call Forwarding No
Answer allows you to forward all your calls to a different phone number
when you do not answer your phone. Use this service when you would
rather have a secretary or co-worker receive the call instead of the caller
being sent to your voice mail if you miss the call.
Call Forwarding No
Answer to Voice
Mail
Missed calls are forwarded to your voice mail.
Last number you dialed is redialed.
Music On Hold per-
Call Deactivation
Allows you to enable/disable music while a party is on-hold. Can be set
for per-call or on persistent basis. Ideal for conference calls.
Direct Voice Mail
Transfer
Transfers a call directly to your or another caller’s voice mail.
Allows you to set the number of rings before a call is forwarded. Press a
key to identify the number of rings you want before the No Answer
message is activated.