Understanding Your Aastra 6737i Telephone
The Aastra 6737i contains physical features and programmable softkeys that can be customized to
meet your specific telephone needs.
Aastra 6737i Physical Features
The physical features on the 6737i telephone are illustrated in the figure and described in the table
below:
Softkeys are built-in features (or a template) set up on your phone and show up on your screen
next to a black softkey or when you press a black softkey. For more details or to change your
features, visit www.it.iastate.edu/howtos/telephone/.
Ends an active call and allows you to exit an open menu (i.e. Options List) without saving
changes.
Lists of options you can use to customize your phone.
Places an active call on hold. Press the Hold key while on the call. The Hold key or Goodbye
key will not retrieve the held call. To retrieve a held call, press the Line key next to the
flashing light.
Redial holds up to 100 previously dialed numbers. Press the Redial key, use navigation keys to
choose a number, and press Dial or Speaker/Headset to redial that number. Or, lift the handset
and press the Redial key twice simultaneously to redial the number on the screen.
Adjusts the volume for the handset, headset, ringer, and speakerphone.
Used for navigating through a list (i.e. Options List).
Used for dialing and speed dialing. Press once for the number and first letter on the key; press
twice for the second letter and three times for the third.
Connects you to an incoming call or allows you to use another line to place a call.
To Next Page
Loading...
