Forward Your Calls to Another Telephone
There are several Call Forwarding options available for the Aastra 6737i and 6739i telephones.
If you plan to be away from your phone, you can set up call forwarding to monitor and/or retrieve
your incoming calls using any one of these methods:
• Options key
• Speed Dials
• Feature Access Codes
• Web Portal
Set Up Call Forwarding Using the Options Key
Follow these steps to activate Call Forwarding using the Options key:
On the Aastra 6737i
1. Press the Options key.
2. Choose the Select softkey for the Call Forward
option.
3. Press the right arrow Navigation key on your
phone.
4. Choose from 3 options, All, Busy or No Answer in
the Call Forward Mode.
5. Set your State to ON or OFF using the right or left
arrow Navigation keys.
6. Press the down arrow to type in the forwarding
number including area code where your calls should
be forwarded.
7. Click Done to return your phone to the main screen.
On the Aastra 6739i
1. Press the Call Forward softkey.
2. Press On for any or all of the three
forwarding options (All, Busy, or No
Answer) and fill in forwarding
number.
Set Up Call Forwarding Using Feature Access Codes
Pick up the handset and press the access code listed in the table below that corresponds to the Call
Forwarding feature you want to use:
Enter number where calls should be
sent then press # key.
Allows you to always forward
calls to a selected number
Call Forwarding Always
to Voice Mail
Allows you to always forward
calls to voice mail
Enter number where calls should be
sent.
Allows you to forward calls
to a selected number
Call Forwarding Busy
to Voice Mail
Allows you to forward calls
to voice mail
Call Forwarding No
Answer
Enter number where calls should be
sent.
Allows you to forward calls
to a selected number
Call Forwarding No
Answer to Voice Mail
Allows you to forward calls
to voice mail
Enter number where call should be
sent.
Gives priority to a specific
call overriding forwarding
options
Set Up Call Forwarding Using Speed Dials
You can use Speed Dials to forward your calls. Type in feature access code *72, then the speed
dial (key or digit) assigned to the number in which you want your calls forwarded. To set up a new
speed dial, follow the instructions in the Speed Dial section above. Use the More softkey to see a
full list of saved speed dials.