Aastra 6737i - Configuring Voice Mail; Configuring Your Voicemail Using Your Phone; Configuring Your Voicemail Using the Clearspan Portal

17
Configuring Voice Mail
Use this section to configure voice mail on your Aastra Telephone or through the Clearspan Web
Portal.
Configuring Your Voicemail Using Your Phone
To configure voice mail using your telephone:
On the Aastra 6737i
1. Press the Voice Mail softkey.
2. Enter the default Passcode provided on
AccessPlus (Employee Tab, Telephone
Services), followed by the "#" key.
3. Change your Passcode then press the "#" key.
4. Record your Name when prompted.
On the Aastra 6739i
1. Press the Messages key.
2. Enter the default passcode provided on AccessPlus
(Employee Tab, Telephone Services), followed by
the "#" key.
3. Change your Passcode then press the "#" key.
4. Record your Name when prompted.
Note: Your Passcode must be 6-12 characters long and NOT:
• Repeat a single number (i.e. 333333)
• Use your own phone number or extension
• Use your own phone number or extension in reverse
• Use a previously passcode or your previous passcode in reverse
Configuring Your Voice Mail Using the Clearspan Portal
To personalize your voice mail system preferences, you will need your ClearSpan Web Portal
Password. If you are unsure of your Password, please contact the Solution Center at 4-4000 to
reset your password. Follow these instructions to setup your voice mail via the Clearspan Web
Portal:
1. Click Messaging under Options.
2. Click Voice Management under the Basic
heading.