Mounting Side Plates, Doors, and Back Plate
Figure 114 Installing the Side Plates
The following procedure is done on one single cabinet or on the first and last
cabinet in a row.
1 Install three screws (I) and three spacers (H) to support the side plate at
the top, the middle, and the bottom on each side of the cabinet or the row,
Page 145 , view 1.
2 Hook the side plate (F) onto the three screws (I) with spacers (H), Page
145 , view 1.
3 Mount two angles (G) onto the panels at the top and the bottom on each
side of the cabinet or the row, Page 145 , view 2.
4 Secure the side plate to the angles located on the upper and lower panels
using two screws (I) for each panel, Page 145 , view 2.
5 If it is a back-to-back cabinet setup, Section 10.2.1 Installing the Side
Plates in Back-to-Back Cabinets on page 146 .
145
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...