Hardware Installation
NTM 144 266 Material set for battery shelf in 19-inch cabinet or frame
Pos. Title/Function
Product
Number Quantity
A Captive nuts M6 SBM 173
060/03
4
C Screws M6X16 78/SBA 121
060/0160
4
Figure 28 Installing the Battery Shelf
1. Mount four captive nuts (A) ( Section 4.4 on page 41 ) in the cabinet
according to the number positions shown, Page 43
2. Insert the strapping belt (L) through the battery shelf, Page 43
3. Fasten the battery shelf (B) using four screws (C), Page 43
4.5.2 Installing the Battery String
Use one of the following material sets when installing the batteries:
Note: For the UK and other areas, where the minus cable is grey and the
plus cable is blue, use these cables instead of the ones in the battery
mounting set. Refer to Table 4 on page 17.
43
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...