Installing MX-ONE
Figure 46 Installing Subrack A
1 Mount four captive nuts (A) ( Section 4.4 on page 41 ) according to the
number positions shown, Page 62
2 Use the screws (C) to fasten the subrack A to the captive nuts in the
cabinet. For the correct holes, Page 62
Make sure that no gap is left between subracks A, and B.
Parts from this mounting set are used at a later installation stage, leave the
remaining parts at hand.
62
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...