Installing MX-ONE
Table 25 Mounting Set for Media Gateway
NTM 144 264 Mounting set
Pos Title/Function Product Number Quantity
C SCREW M 6X16 78/SBA 121
060/0160
4
A CAPTIVE NUT M6 SBM 173 060/03
4
To install the Media Gateway in the cabinet, perform the following steps:
Figure 53 Installing Media Gateway
1 Mount four captive nuts (A) ( Section 4.4 on page 41 ) according to the
number positions shown, Page 70
2 Fasten the Media Gateway to the four captive nuts in the cabinet, using
the four screws (C), Page 70
70
6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...