Installing MX-ONE
Figure 54 Installing MX-ONE Server
• Mount four captive nuts (A) ( Section 4.4 on page 41 ) according to the
number positions shown, Page 72 .
• Fasten the MX-ONE Server to the four captive nuts in the cabinet, using
the four screws (C), Page 72 .
• If necessary, install additional MX-ONE Servers directly above the first one
in the next available cabinet position. No gap is needed between the units.
4.11.2 Connecting Keyboard and Monitor
This section describes how to connect keyboard and monitor to multiple servers.
Table 27 Keyboard and Monitor Package
Pos. Title/Function Product Number
A MX-ONE
TM
Keyboard and Monitor
Package
XX / KDT 252 01/1
B Rack Mount Server KVM Switch (8
ports)
KDU 137 390
Rack Mount Server KVM Switch
Expansion (8 ports)
KDU 137 346
72 6/1531-ASP 113 01 Uen J2 2008-07-17
To Next Page
Loading...