14
Ending a Three-Party Conference
Toggle: GR2
End: h
To end a three-party conference and continue telephoning with only one of the other
two parties, press the keys
R2 to switch to the toggle mode. Then you can dis-
connect one of the parties (see Disconnecting a Call on page 12). You end a three-
party conference by replacing the handset.
On ISDN telephones and on SIP terminals you end a three-party conference by means
of the corresponding function key or a menu.
Connecting Two External Parties with Each Other
R#h
You are speaking with an external party and have another (external) call on hold. With
this procedure you can connect the two parties with each other.
On ISDN telephones and on SIP terminals you use the corresponding function key or a
menu.
Please note: If you connect two external parties whom you called, you will be
charged for the cost of the resultant call. Two SIP lines cannot be
connected!
Connecting Two Parties (Internal/External) with Each Other
h
You are speaking with an external party and have another (internal) call on hold. You
can connect the two parties with each other by simply hanging up the handset.
To Next Page
Loading...
Need help?
General
