Aastra OpenCom 100 - Take; Door Opener; Entrance Intercom Calls

30
Take
H*88#
You accept a current call from a different terminal at your telephone and continue
your call on your telephone. The prerequisite is that your telephone and the other ter-
minal have the same internal call number.
Door Opener
H*11
For enquiry calls:
GR*11
If an automatic door opener is connected, you can use this procedure to activate it
from your telephone.
Entrance Intercom Calls
Calling the entrance intercom
H*101
For enquiry calls:
GR*101
If an entrance intercom (doorstation 6-wire) is connected to your system, you can use
this procedure to speak with a visitor.
If you are operating an entrance intercom (doorstation 2-wire, e. g. of the “DoorLine”
type), you use the following Code-number procedure to speak with a visitor:
H*102
For enquiry calls:
GR*102