27
Announcement
H*13* Z (internal call no.) #
For enquiry calls:
GR*13* Z (internal call no.) #
Using this procedure you can make announcements to system terminals. The loud-
speaker of the destination telephone is activated without a ring, and your
announcement is heard by those present in the room.
If you want to start an announcement on several system terminals to a hunt group
phone number at which the call is signalled simultaneously for example, all called
subscribers hear the announcement at that same time. If one of these subscribers
responds to the announcement (by answering the call), the announcement con-
nection to the other system terminals is terminated.
Note
If a called party has activated the announcement protection, the feature will not be
executed.
Intercom
H*131* Z (device ID) #
For enquiry calls:
GR*131* Z (device ID) #
After entering the device ID, you can initiate an announcement to a single system ter-
minal. The microphone is activated on the terminal called and the person you are
calling can immediately answer your announcement. The “intercom” function cannot
be used for announcements to a group of terminals.
Note
If a called party has activated the intercom protection, the feature will not be exe-
cuted.
To Next Page
Loading...
Need help?
General
