28
Dialout for Another Terminal
H*51* Z (device ID) *Z(destination call number) #
You can also conduct automatic dialling for another terminal. Enter the device ID of
the terminal from which the dialling is to be conducted. Then enter the call number to
be called. The next time the subscriber whose device ID you entered picks up the
handset, (or when using a headset, presses the headset Talk key), the saved desti-
nation call number will be dialled automatically. This programmed number remains
saved for 30 seconds. After 30 seconds, the automatic dialling will be deactivated
automatically.
Callback on Busy
If the internal or external number you have dialled is busy, you can leave a callback
request. (This is not possible if the destination number is a hunt group call number.)
Your telephone will ring as soon as the other party has ended his call. When you lift
the handset, the number of the other party will be dialled.
This feature cannot be used with a SIP terminal.
Leaving a callback request
G*37#
Alternatively:
G6h
On ISDN telephones you can activate “callback on busy” by means of the corre-
sponding function key or a menu.
The
G*37# procedure cannot be used with an FMC telephone / home user tel-
ephone. Use
G6h alternatively.
Cancelling a callback request
G#37#
You cancel your callback request with this procedure.
The “cancelling a callback request” feature cannot be used with an FMC telephone /
home user telephone.
To Next Page
Loading...
Need help?
General
