Aastra OpenCom 100 Quick Reference Guide

16
Call Protection On/Off
For all (internal and external) calls
On:
H*42#
Off: H#42#
Only for internal calls
On:
H*421#
Off:
H#421#
Only for external calls
On:
H*422#
Off:
H#422#
You can protect your telephone against receiving internal and external calls (except
VIP and hunt group calls).
When configuring your user group, your system administrator sets whether a caller
hears a dial tone or an engaged tone when call protection is activated; ask him for the
setting which applies to you.
When call protection is activated, you hear the special dialling tone after lifting the
handset.
On a SIP terminal, you cannot activate/deactivate call protection with the code-
number procedure described here. You can, however, operate the feature with the
OpenCTI 50 / Aastra CTI 800 additional programme. To do so, the system adminis-
trator has to authorise you to use this programme. For more information, please refer
to the online help of the OpenCom 100 / Aastra 800.
Device busy
This feature cannot be used with a SIP terminal.
on:
H*45#
off:
H#45#
If there are multiple trunk keys configured on your telephone, you can configure that
as soon as one of the trunk keys is occupied your device is considered busy. Any
further callers hear the busy signal.

Aastra OpenCom 100 Specifications

General

Brand	Aastra
Model	OpenCom 100
Category	Conference System
Language	English