32
Keypad Dialling
H*12 Z (keypad code digits)
For enquiry calls:
GR*12 Z (keypad code digits)
Certain European network operators require the keypad protocol to be used in order
for you to be able to set certain features (this is not the case in Germany).
You use the sequence
*12 to switch to the keypad protocol, and subsequently
enter the code digits required by your network operator. These are transmitted
directly to the exchange and evaluated there.
You will then generally hear an announcement as confirmation.
CSTA Application Operation
This feature cannot be used with an FMC telephone / home user telephone.
H*17* Z (code) #
alternatively:
H*18*
(one character: 0-9, *, or #)
The communications system can be extended via third-party programmes. If the pro-
gramme offers information entry (e. g. setting room temperature) you can use special
code-number procedures to conduct these settings. The usage of this code-number
procedure depends on the attached application. Your system administrator will
inform you regarding code numbers.
To Next Page
Loading...
Need help?
General
