26
Special Calls
VIP Call
This feature cannot be used with a SIP terminal.
H*# Z (internal call no.)
For enquiry calls:
GR*# Z (internal call no.)
If you have VIP access rights and start an internal call with
*#, your calls will be sig-
nalled acoustically to internal parties even if they have activated their call protection
(call-waiting protection or call protection). This function is also possible in a enquiry
call.
This also applies if the called party has activated immediate call forwarding.
Baby Call
This feature cannot be used with an FMC telephone / home user telephone.
On:
H*53* (external access code, e.g. 0) Z (destination no.)#
Off: H#53#
You can configure your telephone to dial a preprogrammed (internal or external) call
number after a certain length of time after the handset has been lifted (default setting
is 5 seconds).
To prevent the baby call from being made, you can dial another number within the
defined length of time after lifting the handset. The time span is set to a value
between 0 and 20 seconds in the OpenCom 100 / Aastra 800. It is set by your system
administrator for all OpenCom 100 / Aastra 800 users. Please ask him for the current
value.
On a SIP terminal you cannot activate/deactivate the baby call with the code-number
procedure described here. You can, however, operate this feature using the
OpenCTI 50 / Aastra CTI 800 additional programme. To do so, the system adminis-
trator has to authorise you to use this programme. For more information, please refer
to the online help of the OpenCom 100 / Aastra 800.
To Next Page
Loading...
Need help?
General
