IV.Network backup
All medias may be accessed using the Network connection : The internal SSD, and the SD cards
(Access to the internal SSD is Read only).
This option is enabled in the Technical Menu, item “File network Access”.
When enabled, a computer can be connected to the Ethernet plug or throught the Wifi
connection.
Disks are accessed by:
• On a Mac computer: Connecting to the adress smb://MINI-XXXXX
• On a Windows computer: Connecting to the adress \\MINI-XXXXX
XXXXXX being the full Cantar ID that may be found in the Stop Menu, in the top left corner.
(example : 16MP0001)
The credentials are: User=cantar and Password=mini
NB: • If the Cantar is directly connected to the computer without a DHCP server in between,
the Cantar will automatically be assigned an Auto-IP address (169.256.XX.XX).
° For a Windows computer, according to the OS version, it can take about 1
minute to toggle to Auto-IP, in the mean time, it is not possible to connect it to the
Cantar.
• If the connection is not possible with the MINI-XXXX hostname, entering the IP adress
may be tested - throught Wifi : smb://192.168.100.1 on Windows
or \\192.168.100.1 on Mac
- for the Ethernet connection with the IP adress found in the “Display IP
adress” item of the Technical Menu.
Cantar X3
55
To Next Page
Loading...
