Need help?Do you have a question about the AAton CANTAR X3 and is the answer not in the manual?
General| Brand | AAton |
|---|---|
| Model | CANTAR X3 |
| Category | Recording Equipment |
| Language | English |
Route audio inputs to headphone outputs for monitoring.
Route audio inputs to specific tracks or mixdown.
Map individual inputs to any track, including mixdown.
Activate and utilize the pre-record buffer for audio capture.
Edit metadata for the next upcoming recorded take.
Access and edit metadata of the previously recorded take.
Configure solo monitoring for microphone inputs, including phantom power and limiter settings.
Configure solo monitoring for line inputs, including attenuation and filter settings.
Configure solo monitoring for individual tracks, including arm/disarm status.
Configure solo monitoring for AES digital inputs.
Configure solo monitoring for AES-42 digital inputs.
Configure solo monitoring for audio outputs.
Adjust headphone monitoring level and safety clamping.
View the current timecode status and synchronization.
Configure internal timecode source and synchronization.
Slave the Cantar to an external timecode source.
Slave analog inputs to a master input for synchronized settings.
Compensate for phasing issues by delaying input signals.
Power the Cantar unit on and off.
Control playback functions like play, pause, stop, and scrolling.
Set the audio digitizing sample rate.
Configure timecode source, rate, and user bits.
Select between internal or external timecode sources.
Save and load system configurations and presets.
Update the Cantar's operating system firmware.
Configure recording session parameters.
Configure media settings for recording and backup.
Diagram illustrating the Cantar X3's internal audio signal flow.
To Next Page
