EasyManua.ls Logo

Abarth 500e - Page 161

Default Icon
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
STARTING AND DRIVING
136
PEDESTRIAN ACOUSTIC
WARNING SYSTEM
The car is provided with a pedestrian
acoustic warning system. This
system uses different sounds to warn
pedestrians of the approach of the
car. The acoustic warning system is
provided with a speaker located in the
motor compartment. The system is
automatically activated when a gear
other than P (Park) is engaged and
remains active as long as the car is
travelling at a speed of 25 km/h or less.
Any malfunction of the acoustic
warning system is indicated by the
yellow symbol on the display.
ONE-SPEED
TRANSMISSION
The Abarth 500e uses a one-speed
transmission to transmit the power
developed by the electric motor. The
one-speed transmission is operated by
push buttons instead of the traditional
gear lever.
The buttons (A) fig. 129 are located on
the lower dashboard.
129 F0S1090
37)
NOTE Hold the brake pedal pressed
while changing from the P (Park)
position.
NOTE If all button LEDs are lit when
the ignition device is in the ENGINE
position, contact a Dealership.
130) 131) 132) 133) 134)
Transmission ratios
Press required button to engage the
gear.
NOTE To select a gear, the brake pedal
must be pressed.
NOTE After selecting a gear, wait a few
moments to allow the selected gear to
be engaged before accelerating.
P (PARK)
Selecting P (Park) integrates the
functionality of the parking brake by
locking the transmission. It is advisable
to start the car in this gear engaged.
Never try to engage P (Park) when the
car is moving. Apply the parking brake
when leaving the car in position P
(Park).
When parking on flat surfaces, you can
first shift the transmission to P (Park)
and then apply the parking brake.
When parking on sloping roads, apply
the parking brake before shifting the
transmission to P (Park). For added
safety, turn the front wheels towards
the kerb.
NOTE Refer to the gear position shown
on the instrument panel display and
check that it indicates P (Park).
135) 136) 137) 131) 138) 133) 134)
R (Reverse)
The car can be moved backwards
in this position. Select position R
(Reverse) only with the car at a
standstill.
N (Neutral)
You can start the car with this gear
engaged. Apply the parking brake and
move the transmission to position P
(Park) if you wish to exit the car.
139)
D (DRIVE)
Use this gear driving in towns and on
motorways.

Table of Contents

Other manuals for Abarth 500e