MULTIMEDIA
264
order of connection. The last device
connected will have the highest priority.
If no device has been registered, you
can access the "Device Manager"
directly from the "Phone" function.
NOTE Up to 20 device can be paired.
In case of an attempt to pair a twenty-
first device a pop-up window will notify
that this is impossible. Remove a
paired device to allow the pairing of a
new one.
NOTE The Radio may change the track
being played by modifying the from
name of the device in the Bluetooth®
settings of the telephone (where
provided), if the device is by means of
USB after the Bluetooth® connection.
After updating the phone software, for
proper operation, it is recommended
to remove the phone from the list of
devices linked to the radio, delete the
previous system pairing also from the
list of Bluetooth® devices on the
phone and make a new pairing.
WARNING If the Bluetooth®
connection between mobile phone
and system is lost, consult the mobile
phone handbook.
USB SOURCE
There are two USB ports. The first one
is located on the dashboard for data
transfer to the Uconnect™ system
and for charging external devices;
the second one is inside the central
console for charging external devices
only.
When a USB device is plug into
the port on the dashboard with the
radio on, it starts to play the tracks
on the device if the "AutoPlay" is set
to "ON" in the "Audio" menu. If the
"AutoPlay" function is set to OFF and
a smartphone is connected, only
charging the device will be active.
PHONE MODE
Press the “Phone” button on the
display to activate the Phone mode.
NOTE To consult the list of mobile
phones and functions supported,
contact Customer Care on the number
provided in the Warranty or visit the
www.uconnectphone.com website.
Select the desired page on the display
using the bar at the top to:
dial the phone number using the
graphic dial pad on the display;
NOTE The keypad is only active when
the car is stationary. If an attempt is
made to use the keypad with the car
in motion or if driving is resumed
without having completed engagement,
a warning message will appear on
the display and the operation will be
ended.
display and call contacts from the
registers of previous calls;
display and call the contacts in the
phonebook of the mobile phone;
view received text messages;
view the connected devices.
The mobile phone audio is transmitted
through the car’s sound system;
the system automatically mutes the
Uconnect™ system audio when the
Phone function is used.
Pairing a mobile phone
WARNING Carry out this operation
only with car stationary and in safety
conditions; this function is deactivated
when the car is moving.
To pair a mobile phone, see the
procedure in "Pairing a Bluetooth
®
audio device" in this chapter.
"Double telephone" feature
The Uconnect™ system allows
simultaneous Bluetooth® connection
to two telephones. Only one of the two
connected devices can play multimedia
content via Bluetooth®.
WARNING The “double telephone”
feature is not available while using the
To Next Page
Loading...
