263
“Bluetooth”: for a Bluetooth® audio
source, opens the list of devices;
"Browse" for USB/Bluetooth
®
source, allows you to search for
content on your device (if supported by
the telephone);
"Tracks" for USB/Bluetooth
®
source, allows you to select a track
from the playlist;
/ : previous/next track selection
or previous/next station;
: random playback of the tracks
contained in the folder;
: when the last track is finished,
playback automatically resumes from
the first track in the playlist;
: pause track being played;
"Tuning": access the radio station
selection page.
Lower part: Quick access to the
favourite radio stations.
Track selection
The “Tracks” function allows you to
open a window with the list of tracks
being played.
The graphic buttons and can be
used to browse the list of artists, music
genres and albums on the connected
device via USB or Bluetooth
®
,
according to the information recorded
on the tracks themselves.
Within each list, the "ABC" graphic
button allows the user to skip to the
desired letter in the list.
NOTE This button might be disabled for
some Apple devices.
NOTE The DAB frequency can be used
in countries where digital transmission
technology is available. The device
will tuned to any frequency if the DAB
button is pressed in a country where
the service is not provided.
COMFORT MODE
On the screen you can select:
the airflow distribution settings:
windscreen, face, face plus feet, feet
plus windscreen;
the inside temperature settings;
fast windscreen heating ( Max)
the defrosting of the rear window
( );
the activation of the climate control
system (A/C);
the activation of the climate control
system with maximum cooling (Max
A/C);
the recirculation function;
the AUTO function;
the activation/deactivation of the
heated seat function (where provided).
BLUETOOTH® MODE
This mode is activated by pairing a
Bluetooth® device containing music
tracks with the Uconnect™ system.
PAIRING A BLUETOOTH®
AUDIO DEVICE
The pairing of a Bluetooth® device
(e.g. a smartphone) is done via the
"Device Manager" function on the
"Phone" page.
Proceed as follows to pair a device:
activate the Bluetooth® function on
the device;
access the "Device Manager"
function;
press the "Add Device" (Add device);
a pop-up window shows the
temporary PIN to be entered on the
device;
search for Uconnect™ on the
Bluetooth® audio device;
when requested by the audio device,
enter the PIN code shown on the
system display or confirm on the device
the PIN displayed;
if the pairing procedure is completed
successfully, a screen is displayed.
Answer “Yes” to the question to pair
the Bluetooth® audio device as
favourite (the device will have priority
over all other devices to be paired
subsequently). If "No" is selected, the
priority is determined according to the
To Next Page
Loading...
