273
To enable software updates:
Select “Enable software download
over Wi-Fi" on the Wi-Fi settings
screen.
When a software update is available,
a pop-up window will appear on the
Uconnect™ system screen to alert
you that a new update is available.
When asked to connect to a Wi-Fi
network, select "Yes".
During the update, a second pop-
up screen shows the estimated time
remaining and the progress percentage
of the update. When the update is
finished, press "OK".
Instant update
Press the "Update Now" button to
update the software immediately when
the pop-up window appears on screen.
Scheduled update
Use the scheduled update option to
set a deferred update time. Press the
arrows / on the screen to set the
desired time.
NOTE The scheduled update option
can be used 20 times per update. After
the 20th postponement the update will
be made mandatory when the car is
first started. In case of a mandatory
update you can only press the "OK"
button on the pop-up and start the
update.
During the update the radio will
show the percentage of the update
completed and the time remaining until
completion fig. 236. When the update
is complete the Uconnect™ system
will automatically restart.
Update errors
In case of errors during the update, the
operation will be interrupted and the
following messages will appear:
"An error has occurred. The system
will revert to the previous software
version."
"Update failed. - An error was
detected during the update procedure.
Call assistance. Error code: XXXX"
Contact a Dealership in these cases.
Uconnect Box updates
(where provided)
The Uconnect™ system can update
the Uconnect Box remotely via Over
The Air update.
NOTE Instead of using external Wi-Fi
connections, Over The Air software
updates use the data connectivity
included with the car, at no additional
cost to the customer.
When a software update Uconnect
Box is available, a pop-up window
will appear on the screen offering the
update instantly or at a later time.
NOTE The Uconnect Box can only be
updated when the car is off (ignition
device in OFF position).
Instant update
Press the "Update Now" button to
update the software immediately when
the pop-up window appears on screen.
The update will take place with the car
is off. When the update is complete the
Uconnect™ system will automatically
restart.
Scheduled update
Use the scheduled update option to
set a deferred update time. Press the
arrows / on the screen to set the
desired time.
During the update, the radio will
show the percentage of the update
completed and the time remaining
until completion. When the update is
complete the Uconnect™ system will
automatically restart.
Update errors
In case of errors during the update, the
operation will be interrupted and the
following messages will appear:
"An error has occurred. The system
will revert to the previous software
version."
"Update failed. - An error was
detected during the update procedure.
Call assistance. Error code: XXXX"
To Next Page
Loading...
