Abarth 500e - Page 297

MULTIMEDIA
272
When a software update is available, a
pop-up window will appear on screen
informing that a new software version
or new features for the Uconnect™
system are available.
NOTE The rear-view camera,
Uconnect™ system and other driver
assistance systems are not available
during the update. It is recommended
to carry out the update when the car is
stationary.
WARNING Some car or phone settings
may be lost after an Over The Air
software update. Check and re-enter
any missing Uconnect™ system
settings, if necessary.
Instant update
Press the "Update Now" button
fig. 235 to update the software
immediately when the pop-up window
appears on screen.
Scheduled update
In case of a mandatory update, press
the "Update now" or “Schedule
update" button fig. 235. The scheduled
update option allows you to define a
different update time. Press the arrows
/ on the screen to set the desired
time.
235 F0S2074
NOTE The scheduled update option
can be used 20 times per update. After
the 20th postponement the update will
be made mandatory when the car is
first started. In case of a mandatory
update you can only press the "OK"
button on the pop-up and start the
update.
During the update the radio will
show the percentage of the update
completed and the time remaining until
completion fig. 236. When the update
is complete the Uconnect™ system
will automatically restart.
236 F0S2075
Updates over external Wi-Fi
When a software update via Wi-Fi is
available, a pop-up window will appear
on the screen offering the update
instantly or at a later time.
NOTE The rear-view camera,
Uconnect™ system and other driver
assistance systems are not available
during the update. It is recommended
to carry out the update when the car is
stationary.
To allow the Uconnect™ system to
update its software:
Select "Settings" on the screen
Select "Wi-Fi" in the settings list
Select the correct Wi-Fi router from
those shown
NOTE If the Wi-Fi router is too far from
the car, it will not be shown among the
available ones.
If prompted, enter the password to
access the router and select "OK".