To Next Page

To Previous Page

33Transport, handling and unpacking

4. Transport, handling and unpacking

In this section are explained all the transport specification, including handling and unpacking procedures of

the EVSE.

Chapter recipients:

• Owner

• Qualified installer

4.1 Transport of the EVSE - Preliminary operation

A transport company delivers the EVSE close to the site. The movement of the EVSE to its final location is his

responsibility.

NOTE

If you need to store the EVSE before installation, obey the ambient conditions for storage.

DO NOT store the equipment in a location exposed to severe weather conditions (e.g. rain, snow

or a high level of humidity).

CAUTION

You are prohibited from transporting or handling the EVSE unless you are authorised to handle

the charger and you comply with the following safety measures!

WARNING

Please follow these steps to comply with the applicable Safety measures applicable to the

working area including Instructions for safe handling of the EVSE

DANGER

Handling personnel must wear all appropriate and applicable personal protective equipment

(PPE) and follow all the applicable Health and Safety measures applicable to the working area.

• Choose the lifting equipment (forklift truck, crane, etc..)

• Check the weight on the transport document before moving the load.

Check that the forklift truck or hoisting equipment for loading/unloading is suitable and is able to move the

EVSE based on weight, and that the forks of the forklift truck is fully able to move into the pallet to provide

full support. Fork lift operators must comply to all local regulations.

• Check the position of the center of gravity before lifting the EVSE in order to avoid overturning.

• Check that the pallet is not damaged. Otherwise please contact the responsible Health and Safety manager

for the site to get instructed on how to unload the EVSE and move it in a safe way.

• Check If you see any damage on the EVSE, through the packaging material. If yes, do not unpack the EVSE

and contact the manufacturer to give details of the delivery problems.

ABB 2 Series User Manual

Questions and Answers: