ABB 2 Series - Ethernet; Connect the Ethernet Cable - Terra 60

61Electrical connection
EN
7.3 Ethernet
The charger’s Ethernet port is configured by default to enable communication, without the need for specific
settings. If an on-site internet connection is available, the charger will be automatically configured to transmit
telemetry data to the ABB EVCI Cloud without the need to install any additional devices (the logging
functionality is already integrated into the charger by default). ABB’s EVCI cloud platform consists of several
solutions for monitoring and management of chargers in real-time. For more information, please refer to
https://new.abb.com/ev-charging/connected-services/web-modules.
We recommend using at least a CAT 5e category Ethernet cable for standard connection performance.
For installations in environments with a high presence of electromagnetic interference and/or noise, we
recommend using at least a CAT 6 shielded LAN cable.
For installations in environments subject to extreme conditions, consult an expert technician.
7.3.1 Connect the ethernet cable - Terra 60
A
• Open the cover (B) on the connector X1 (A).
• Connect the Ethernet cable (C) to the Ethernet
connector X1 (A).
X1
A
B
C
Connect the ethernet cable - Terra 360
A
• Open the cover (B) on the connector X1 (A).
• Connect the Ethernet cable (C) to the Ethernet
connector X1 (A).
X1
A
B
C