ABB ACS800-17 - Altitude Derating; Temperature Derating

Technical data
137
Temperature derating
In the temperature range +40 °C (+104 °F) to +50 °C (+122 °F), the rated output current is decreased
by 1% for every additional 1 °C (1.8 °F). The output current is calculated by multiplying the current
given in the rating table by the derating factor.
Example
If the ambient temperature is 50 °C (+122 °F), the derating factor is 100 % - 1 · 10 °C =
90% or 0.90. The output current is then 0.90 × I
2N
or 0.90 × I
cont.max
.
Altitude derating
At altitudes from 1000 to 4000 m (3281 to 13123 ft) above sea level, the derating is 1% for every 100 m
(328 ft). For a more accurate derating, use the DriveSize PC tool. If the installation site is higher than
2000 m (6600 ft) above sea level, please contact your local ABB distributor or office for further
information.
%
°C