ABB ACS800-17 - Page 44

The ACS800-17
44
Voltage range
(nominal rating in bold)
3 = 380/400/415 V AC
5 = 380/400/415/440/460/480/500 V AC
7 = 525/575/600/690 V AC
+ options
I/O options Refer to ACS800 Ordering Information (code: 64556568 [English]).
Fieldbus adapter
Control program
Degree of protection B053 = IP22 (UL Type 1)
B054 = IP42 (UL Type 1)
B055 = IP54 (UL Type 12)
B059 = IP54R with connection to air outlet duct
Construction C121 = Marine construction (reinforced mechanical parts and fastening,
marking of conductors [A1], door handles, self-extinctive materials)
C129 = UL Listed
C134 = CSA Approved
Filters E202 = EMC/RFI filtering, Cat. C2, 1st Environment, TN (grounded) system.
Note: EMC/RFI filtering for 2nd Environment (+E210) is standard equipment.
E206 = Sine filter – Not available with +C121 or +C129.
Line options F259 = Earthing switch – Not available with +C129
Cabling H350 = Bottom entry (with +C129)
H351 = Top entry
H352 = Bottom exit (with +C129)
H353 = Top exit
H356 = DC cable connection busbars
H358 = US/UK gland/conduit plate (steel, 3 mm)
H359 = Common motor terminal cubicle
H365 = US/UK gland/conduit plate (brass, 6 mm)
Auxiliary voltage G304 = 115 V AC
Cabinet options G300 = Cabinet heaters (external supply) – Not available with +C134
G307 = Input terminals for external UPS-backed auxiliary voltage
G313 = Output for motor heater (external supply)
G317 = Busbar supply conductors
G330 = Halogen-free wiring and materials – Not available with +C129 or
+C134
G338 = Wire marking class A1
G339 = Wire marking class A2
G340 = Wire marking class A3
G341 = Wire marking class B1
G342 = Wire marking class C1
Language of manuals Rxxx
Refer to ACS800 Ordering Information (code: 64556568 [English]).
Starter of auxiliary
motor fan
M602 = 2.5 … 4 A (1, 2 or 4 pcs)
M603 = 4 … 6.3 A (1, 2 or 4 pcs)
M604 = 6.3 … 10 A (1, 2 or 4 pcs)
M605 = 10 … 16 A (1 or 2 pcs)
M606 = 17 … 25 A (1 pc)
Selection Alternatives