ABB ACS800-37-0170-3 - Resistor braking; Resistor braking options

Resistor braking
219
Resistor braking
What this chapter contains
This chapter describes the resistor braking options of the ACS800-37.
Resistor braking options
The following ACS800-37 drives are available with brake choppers and resistors.
For information on braking equipment for other ACS800-37 types, or custom resistor
braking equipment, contact your local ABB representative.
U
N
ACS800-37 type Brake chopper type (+D150) Brake resistor type (+D151)
400 V
ACS800-37-0060-3
• • •
ACS800-37-0170-3
NBRA-658 2 × SAFUR210F575
ACS800-37-0210-3
• • •
ACS800-37-0510-3
NBRA-659 2 × SAFUR180F460
ACS800-37-0640-3
ACS800-37-0770-3
2 × NBRA-659 2 × (2 × SAFUR180F460)
ACS800-37-0960-3 3 × NBRA-659 3 × (2 × SAFUR180F460)
500 V
ACS800-37-0070-5
• • •
ACS800-37-0210-5
NBRA-658 2 ×SAFUR125F500
ACS800-37-0260-5
• • •
ACS800-37-0610-5
NBRA-659 2 × SAFUR200F500
ACS800-37-0780-5
ACS800-37-0870-5
2 × NBRA-659 2 × (2 × SAFUR200F500)
ACS800-37-1160-5 3 × NBRA-659 3 × (2 × SAFUR200F500)
690 V
ACS800-37-0170-7
• • •
ACS800-37-0540-7
NBRA-669 2 × SAFUR200F500
ACS800-37-0790-7
ACS800-37-0870-7
2 × NBRA-669 2 × (2 × SAFUR200F500)
ACS800-37-1160-7 3 × NBRA-669 3 × (2 × SAFUR200F500)