About this manual
13
About this manual
What this chapter contains
This chapter describes the intended audience and contents of this manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.
Compatibility
The manual is compatible with ACSM1-04 (frame size E).
Intended audience
This manual is intended for people who plan the installation, install, commission, use
and service the drive. Read the manual before working on the drive. The reader is
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
This manual is written for readers worldwide. Both SI and imperial units are shown
wherever appropriate.
Categorization according to the + code
The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with + codes, e.g. +L500. The options
included in the drive can be identified from the + codes visible on the type
designation label of the drive. The + code selections are listed in chapter The
ACSM1-04 under Type code.
Product and service inquiries
Address any inquiries about the product to your local ABB representative, quoting
the type code and serial number of the unit in question. A listing of ABB sales,
support and service contacts can be found by navigating to www.abb.com/drives
and
selecting Drives – Sales, Support and Service network.
Product training
For information on ABB product training, navigate to www.abb.com/drives and select
Drives – Training courses.
Providing feedback on ABB Drives manuals
Your comments on our manuals are welcome. Go to www.abb.com/drives and select
Document Library – Manuals feedback form (LV AC drives).
To Next Page
Loading...
Need help?
General
