ABB Conceptpower DPA 500 - Type Plate and Model Identification

Modifications reserved
Page 10/94
2.4 Type plate and model identification
The type plate shown in Figure 1 here below is positioned on the internal side of the UPS door in a
center position. It contains the basic electrical characteristics as well as, product name, serial number
and production date. The identification table (Table 2) helps to crosscheck the Type (first part of the
serial number) with the UPS model.
Figure 1: Type plate of Conceptpower DPA 500.
Table 2: identification table with dimensions of Conceptpower DPA 500.
TYPE
UPS MODEL
Dimensions w/o
packaging in mm
Dimensions with std.
packaging in mm
Dimensions w/ wooden
box in mm
5Uxxxx
Conceptpower DPA 500
1580x1975x940
1750x2120x1000
1850x2350x1050
TYPE
Module
Dimensions w/o
packaging in mm
Dimensions with std.
packaging in mm
Dimensions w/ wooden
box in mm
A5Mxxxx
Active sub-module
710x178x750
750x200x800
(approx.)
n.a.
P5Mxxxx
Passive sub-module
Table 3: weight table in kg without batteries of Conceptpower DPA 500.
Weights in kg
100kW modules
quantity
NET weight without
packaging
Weight with standard
packaging
Weight with wooden
box
DPA 500 Frame
0
430
465
550
1
539
574
659
2
648
683
768
3
757
792
877
4
866
901
986
5
975
1010
1095
Active sub-module
(separately)
-
55 56 n.a.
Passive sub-module
(separately)
-
59 60 n.a.