ABB Conceptpower DPA 500 - Home Screen

Modifications reserved
Page 47/94
6.4.7 Home screen
The display is driven by a menu-prompted software. The home screen is accessible from any screen
and gives access to the following:
Events:
Directs the user to the
Event log
screen where the stored events and alarms are shown
in chronological order.
Measures:
This button directs to the
Measures
screen which displays electrical measurements of
the UPS such as voltages, power, currents, autonomy, etc.
Command :
PASSWORD NEEDED
1
: enables the operator to execute the following basic operations:
“Load to inverter”, “Load to bypass”.
UPS Data :
Directs to the
UPS data
screen which gives information regarding the identity of the
UPS.
User:
This button directs to the
User settings
sub-menu allows to set language, etc.
Service :
PASSWORD NEEDED
2
: enables the service technician to perform restricted commands,
enable or disable Xtra VFI and set restricted UPS parameters.
Figure 20: Home Screen
Events
Displays a list of recently occurred events with
date, time, event name, description and sequential
identification number
. The events are ordered with the most recent on top.
1
The password for accessing the command menu is different than the one needed to access the service menu.
2
The password for accessing the service menu is different than the one needed to access the command menu.