ABB Conceptpower DPA 500 - MIMIC Diagram - System Level

Modifications reserved
Page 45/94
6.4.5 Mimic Diagram – system level
The mimic diagram is the default screen. It shows the power flow through the UPS system (single
frame as well as multi-cabinet configuration) and indicates its status. This diagram can be accessed
from any screen using the corresponding icon in the display header.
Figure 19: Mimic Diagram Screen - system level
The color of each block identify its functional status. There are four main colors in the mimic diagram:
• Green: In operation
• White: Inactive block
• Yellow: Warning condition
• Red: Fault condition
Device
Color meaning
Rectifier
Green: Rectifier is on.
Red: Rectifier is switched off.
Inverter
Green: Load is on inverter.
Red: Inverter is switched off.
Bypass
Green: Load is on bypass or eco-mode
White: Bypass is switched off.
Battery
Green: Battery is charging or discharging.
Yellow: Battery is low.
Red: Battery is in fault condition or is discharged.
Arrows indicate if battery is charging or discharging.
Maintenance Bypass IA1
Yellow: Load is on maintenance bypass
White: Maintenance bypass opened
Output Breaker IA2
Green: Parallel- Output breaker is closed (Position ON)
(Default condition with single UPS)
Red: Parallel- Output breaker is opened (Position OFF)
Touching the functional blocks in the mimic diagram, the measurements related to the object selected
are displayed. The interactive blocks are the following:
• Rectifier
• Inverter
• Battery
• Bypass
The green connecting lines indicate the power flow in the system.