ABB Conceptpower DPA 500 - Home Screen; Xtra VFI Measures Screen

Modifications reserved
Page 85/94
A.3.1.2 Home screen
Figure 32 here below, shows the Home screen which is the starting point to access all menus of the
UPS system.
Figure 32: Home screen
A.3.1.3 Xtra VFI measures screen
Figure 33 here below, shows the Xtra VFI measures screen which is accessible via Home screen by
pressing the icon and then .
Figure 33: Xtra VFI measures screen
This menu contains the following information/commands.
Status
Shows the status of Xtra VFI. Refer to chapter A.1.1.3
Inverters on
Shows the quantity of modules which are active (double-conversion).
Inverters standby
Shows the quantity of modules which are in Standby.
Total saved energy
[kWh]
Indicates the saved energy since the first activation of Xtra VFI feature.
Can be reset via service menu (PASSWORD NEEDED).
Saved energy [kWh]
Indicates the saved energy since the last reset. Can be reset by the
button just below.
Reset saved energy
counter
Reset the saved energy counter