ABB Conceptpower DPA 500 - Icons

Modifications reserved
Page 84/94
A.3.1.1 Icons
Icon View Description
Home
The Home button is accessible from all screens and directs to
the Home screen, the main screen of the display.
Mimic Diagram
The mimic diagram button is accessible from all screens and
directs to the
Mimic diagram (system level)
screen.
Xtra VFI
The Extra VFI button is accessible from all screens and function
as toggle to switch between
Xtra VFI measures
screen and
Xtra VFI status bar
screen.
Warning
This symbol appears in case of alarms or events on any screen.
Touching this icon the alarm is silenced and directs to the
Event
log
screen.
Modules
selection
Directs to the
Module selection
screen from where it is
possible to select the module and start the navigation (status
and measurements) on module level.
Event log
Directs the user to the
Event log
screen where the stored
events and alarms are shown in chronological order.
Measures
This button directs to the
Measures
screen which displays
electrical measurements of the UPS such as voltages, power,
currents, autonomy, etc. Not Needed for XTRA VFI.
Command
PASSWORD NEEDED
4
: enables the operator to execute the
following basic operations: “Load to inverter”, “Load to bypass”.
UPS Data
Directs to the
UPS data
screen which gives information
regarding the identity of the UPS.
User
This button directs to the
User settings
sub-menu allows to set
time and date, language, etc.
Service
PASSWORD NEEDED
5
: enables the service technician to
perform restricted commands, enable or disable Xtra VFI and
set restricted UPS parameters.
4
The password for accessing the command menu is different than the one needed to access the service menu.
5
The password for accessing the service menu is different than the one needed to access the command menu.