ABB Conceptpower DPA 500 - Main Menu Screen; Event Log Screen

Modifications reserved
Page 54/94
P02
stands for
P
arallel UPS in a Multi- UPS system and 02 stands for the second UPS
(
SLAVE
) in the Multi- UPS system.
P03
stands for
P
arallel UPS in a Multi- UPS system and 03 stands for the third UPS
(
SLAVE
) in the Multi- UPS system.
The definition of the UPS “Position” in a parallel system is achieved in the Menu Set-Up Service.
DESCRIPTION
LCD-DISPLAY
Single UPS Systems
SYSTEM
CONFIGURATION
SINGLE
S
Parallel System e.g. first UPS cabinet
SYSTEM
CONFIGURATION
PARALLEL
P01
Parallel System e.g. second UPS cabinet / Slave
LOAD OFF
SUPPLY FAILURE
P02
Note: The max no. of UPS units is 6.
6.5.7 Main Menu Screen
DESCRIPTION
LCD-DISPLAY
1
Logging Control. A log of the last 99 events is stored in
the
Power Management Display.
 EVENT LOG
MEASUREMENTS
2
In Menu Measurements: monitor voltages, power,
frequencies, currents, autonomy etc.
 MEASUREMENTS
COMMANDS
3
The Command Menu enables to perform the
commands “Load to inverter”, Load to bypass, battery
test.
 COMMANDS
UPS DATA
4
The UPS Data are the UPS personalized information
“serial number”
 UPS DATA
SET-UP USER
5
Various settings can be performed by the user:
Date/Time, automatic battery test, etc.
 SET-UP USER
SET-UP SERVICE
6
Various adjustments can be performed by the service
staff
 SET-UP SERVICE
NO MORE MENU
6.5.8 Event Log Screen
DESCRIPTION
LCD-DISPLAY
1
Logging Control; a log of the last 99 events is stored in
the Power Management Display.
01 05-10-08
LOCAL LOAD OFF
14:38:59
2
Every stored event is identified with a sequential number
and time stamp.
02 05-10-08
LOCAL LOAD TO BYP
14:38:56
3
By press ENTER the code of the event will be displayed. (Press
ENTER to come back to the previous indication)
03 8104
LOCAL LOAD TO INV
4
All events and alarms are indicated with their date and
time of appearance.
04 05-10-08
LOCAL LOAD TO INV
14:37:14