ABB Conceptpower DPA 500 - UPS Data; Set-Up User; Set-Up Service

Modifications reserved
Page 56/94
6.5.11 UPS Data
DESCRIPTION
LCD-DISPLAY
1 These general UPS Data are set by the manufacturer.
UPS SERIAL NUMBER
PWA nnnnnn
2 Manufacturing date
DATE OF MANUFACTURE
15/01/2014
3
EPROM Version
EPROM VERSION
V.V CCCC
4
Hardware Version
HARDWARE VERSION
00000000
5
Dynamic password
DYNAMIC PASSWORD
YES/NO
6
Actual Date and Time
DATE TIME
dd-mm-yyyy hh:mm:ss
6.5.12 Set-Up User
DESCRIPTION
LCD-DISPLAY
1 Set-up Language
 SET LANGUAGE
SET DATE AND TIME
2 Set-up Date and Time
 SET DATE AND TIME
SET-UP BATT. TEST
DD/MM/YY HH:MM:SS
3
Set-up battery test
 SET BATTERY TEST
SET GENERATOR OP.
DAY OF MONTH
(1-31)
HOUR OF DAY
(1-24)
REPETITIVE (Y/N)
YES/NO
4
Set-up operation with Gen-Set
 SET GENERATOR OP.
NO MORE SETTINGS
BATT.CHARGE LOCK
YES/NO
BYPASS LOCK
YES/NO
6.5.13 Set-Up Service
DESCRIPTION
LCD-DISPLAY
1 This Menu is reserved for CERTIFIED service engineers.
It is not to be used by End-Users
 SET-UP SERVICE
PASSWORD
2
Type in password
 PASSWORD.
Note: Password is required to enter into the service menu.