Modifications reserved
Document information
: 04-3275_OPM_ABB_CONCEPTPOWER_DPA_500kW_EN_REV-B.docx
Conceptpower DPA 500
: 03.05.2016
: 04-3275
: 4NWD003263
: C
Foreword
The UPS system operates with mains, battery or bypass power. It contains components that carry
high currents and voltages. The properly installed UPS system is grounded to earth and IP 20 rated
against electrical shock and foreign objects.
COMMISSIONING AND OPERATIONS INSIDE THE UPS
MUST BE PERFORMED BY A CERTIFIED SERVICE
ENGINEER FROM THE MANUFACTURER OR FROM AN
AGENT CERTIFIED BY THE MANUFACTURER.
BY NOT FULFILLING THIS OBLIGATION, THE
PRODUCT MAY LOSE ITS WARRANTY
This user manual contains guidelines to check delivery, installing and commissioning of the UPS and
is intended for people who plan the installation, install, commission and use or service the UPS. The
reader is expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
THE INSTRUCTIONS IN THIS MANUAL MUST BE
FOLLOWED TO PERFORM ANY OPERATION ON THE
UPS.