Modifications reserved
The small (125x70 mm) External SNMP adapter comes with following interfaces:
1. RJ-45 connector for 10/100 Base-T (auto switchable)
2. Serial Port for configuration (COM2) or optional ModBus
interface.
3. Error/Link LED for UPS status
4. Aux Port
5. DIP Switch
6. Serial Port to the UPS (COM1)
7.
DC Supply (9 VDC or 9-36 VDC supply, depending on model);
Figure 28: External SNMP Adapter
The Internal SNMP-Card can be inserted into an appropriate
extension slot of the
This adapter communicates via the
serial port of the UPS and makes a direct multiple server shut
down possible without additional SNMP management software.
Figure 29: Internal SNMP Adapter
For detailed information please see Software Manual provided with the PMC-Software CD
ROM.
RCCMD - Remote Console Command module
for a multi-server shutdown. This stand-alone
software module is designed to receive and execute a command issued by a remote device. Thanks
to RCCMD it is possible to execute a shutdown in an heterogeneous multiplatform network. The new
release RCCMD2 is an application available for all Operating Systems, analogous to PMC-Software.
Our SNMP Interfaces are compatible to RCCMD.
To Next Page
Loading...
