PORT NUMBERS
A “Port” on an IP device is a concept that allows traffic to be mapped within a device’s address to a specific
process running in that device. A Port number forms part of a data packet’s IP address, but is often set by
convention, depending on the protocol that the packet uses. For example, HTTP traffic by convention uses
port
80
. If no port is specified in the IP address for HTTP traffic, port 80 will be assumed. If a port is specified
(e.g. port
8080
as in the address
192
.
168
.
100
.
33
:
8080
), the specified port will be used instead. This allows the
device to communicate on multiple protocols at the same time.
Some of the services associated with port numbers include:
Some of the port numbers recognized by FBXi are shown below. These can be changed in the controllers
Web UI at IP Network > TCP/UDP Ports
To Next Page
Loading...
Need help?
General
