Need help?Do you have a question about the ABB Cylon FBXi Series and is the answer not in the manual?
General| Series | FBXi Series |
|---|---|
| Input/Output | Configurable |
| Mounting | DIN Rail |
| Enclosure Rating | IP20 |
| Type | Controller |
| Communication Protocols | BACnet MS/TP, Modbus RTU |
| Inputs | Analog, Digital |
| Outputs | Analog, Digital |
| Power Supply | 24 VAC/DC |
| Memory | Flash Memory (size varies by model) |
| Dimensions | Varies by model |
| Weight | Varies by model |
Provides an overview of the FBXi Series controllers and their capabilities.
Details the energy management applications for which the FBXi Series is designed.
Explains the Internet Protocol (IP) and its role in network communication.
Covers IP address assignment, DHCP, subnetting, and CIDR notation.
Defines IP port numbers and their association with network services.
Explains network segmentation for performance and security using routers.
Describes NAT's function in mapping local IPs to a single public IP address.
Explains DNS for translating URLs to IP addresses for device communication.
Defines BACnet as a protocol for building automation and control networks.
Lists and describes standard BACnet object types used in ABB Cylon products.
Details the BACnet services supported by ABB Cylon BACnet products.
Explains the BACnet client/server architecture and message requests.
Lists the various network types BACnet messages can be carried over.
Describes the Protocol Implementation Conformance Statement (PICS).
Illustrates typical BACnet network device connections and addressing.
Details how BACnet/IP uses UDP to send data packets and its communication methods.
Explains the role of BBMD in facilitating BACnet broadcasts across subnets.
Describes the MS/TP network layer for lower-level devices using EIA-485.
Explains the MS/TP token passing mechanism for network communication.
Details the Device Instance and MAC Address assignments in MS/TP.
Lists the supported baud rates for BACnet MS/TP communication.
Discusses optimizing MS/TP networks via device properties like Max-Master.
Explains MS/TP device loading and unit load limitations on fieldbus.
Describes the BACnet service for reading multiple properties at once.
Explains BACnet's command prioritization scheme using priority levels.
Displays controller status, firmware versions, and I/O status.
Settings for BACnet Device Name, Device ID, and Router Networks.
Details BACnet time synchronization messages and transmit options.
Covers configuration for Broadcast Management Devices and NAT.
Configuration of hostname, IP address, gateway, DNS, and DHCP.
Defines IP ports for protocols like HTTPS, HTTP, and BACnet.
Explains how to manage SSL certificates for secure web access.
Configuration and status monitoring for RS-485 ports.
Captures serial port communications for network analysis.
Access to status reports, firmware upgrades, backup/restore, time/date, and restart.
Tools for troubleshooting: processes, debug levels, system logs, and acknowledgments.
Applying power and connecting the FBXi to an IP network.
Describes the FBXi's integrated Ethernet switch and daisy-chain topology.
Configuring IP connection using CXproHD or manually.
Instructions for accessing the controller's web interface and logging in.
Specifies IP ports for protocols and IP security settings.
Configuring BACnet communications, Device ID, and Device Name.
Cabling requirements and termination for BACnet MS/TP network.
Connecting FLX units and setting their addresses.
Joining, terminating, and extending the FLX bus.
Adding controllers, setting date/time, and configuring FLX modules.
Configuring Modbus RTU and IP connections for the FBXi.
Putting I/O into a known safe mode using the Wipe Controller command.
Instructions for opening and setting up the controller strategy in CXproHD.
Placing and configuring Modbus points within the strategy drawing.
Diagrams of physical layout and detailed dimensions for FBXi models.
Wiring diagrams, supply requirements, and FLX power connection details.
Terminal descriptions, input/output modes, and LED signal meanings.
Details FLX module I/O capabilities and input/output modes.
Explains Analog, Digital, and Relay output modes for UniPut terminals.
Explains the 18 V DC auxiliary power outputs for FLX modules.
Describes connecting a CBT-STAT or UCU Room Display keypad to the FBXi.
Procedures for restarting, resetting WebUI, factory reset, and firmware upgrade.
To Next Page