To Next Page

To Previous Page

FBXi Series | FBXi Web UI

Subject to change without notice

WWW.CYLON.COM

MAN0149 rev 10

TCP/UDP PORTS

This page defines IP ports that are open to the outside world, and the protocols those ports expect to use.

HTTPS/HTTP are used for this web configuration.

• HTTPS is always enabled, though the port can be changed if required.

• HTTP is disabled by default.

The BACnet ports are needed if the controller must communicate with other BACnet controllers over IP.

Table of Contents3
The Fbxi Series6
Introduction6
Application6
Ip Networking7
What Is IP7
Physical Layer (Layer 1)7
Datalink Layer (Layer 2)7
Network Layer (Layer 3)7
Transport Layer (Layer 4)7
Session Layer (Layer 5)7
Presentation Layer (Layer 6)7
Applications Layer (Layer 7)7
IP Addressing8
DHCP (Dynamic Host Configuration Protocol)8
Subnetwork (Subnet)8
Default Gateway9
Port Numbers10
Uplink/Wan and Segmentation11
Network Address Translation (NAT)12
Domain Name System (DNS)12
Bacnet Networking13
What Is Bacnet13
Bacnet Object Types14
Bacnet Services14
Bacnet's Client / Server Nature15
Network Types15
PIC Statement15
Bacnet Topology16
Bacnet IP17
Bacnet IP Broadcast Management Device (BBMD)17
Bacnet MS/TP18
Token Passing18
Addressing18
Baud Rates19
Network Optimization19
Bacnet MS/TP Device Loading19
Read Property Multiple19
Bacnet Priority Array20
Fbxi Web Ui21
Summary Dashboard21
Bacnet Menu22
Device22
Router Networks22
Time Sync23
Bbmd / Nat24
IP Network Menu25
Configuration25
TCP/UDP Ports26
Edit SSL Cert / Sign SSL Cert27
RS-485 Port Menu28
Configuration28
Status28
Platform Menu30
Status Report30
Firmware Upgrade Utility30
Backup/Restore Utility31
Set Time and Date32
Restart Utility33
Diagnostics Menu34
Processes34
Debug Level35
System Logs36
Open-Source Acknowledgment Notices37
Installation38
Apply Power to the Fbxi38
Connect the Fbxi to an IP Network38
The Fbxi Integrated Ethernet Switch39
Configuring the IP Connection39
Configure the Fbxi for Bacnet® Communications47
Connect the Fbxi to Bacnet MS/TP49
Terminate the MS/TP Network49
Attach RS-485 Communication Wires to the MS/TP Subnet Port49
Connect the Fbxi Series to FLX Units50
Set the FLX Address50
Join or Terminate the FLX Bus51
(If Required) Set up FLX Bus Extension51
Add the Controller to the Cxproᴴᴰ Site54
Set Controller Date and Time54
Set up the Fbxi and Connected FLX Modules in a Site in Cxproᴴᴰ55
(If Required) Configure a Modbus Connection59
Set I/O to a Known Safe Mode66
Set up the Controller Strategy66
Accessing Modbus Points in the Strategy68
Fbxi Operation70
Physical Layout70
Fbxi Indicator LED Signals73
Inputs and Outputs - FLX Modules74
Input Modes74
Output Modes77
Auxiliary Power Outputs78
Using a Keypad with the Fbxi79
Restarting, Resetting and Upgrading the Fbxi80
Resetting the Webui Login80

Brand	ABB
Model	Cylon FBXi Series
Category	Controller
Language	English

ABB Cylon FBXi Series User Manual

Table of Contents

Questions and Answers:

ABB Cylon FBXi Series Specifications

Related product manuals