Need help?Do you have a question about the ABB CBXi Series and is the answer not in the manual?
General| Series | CBXi |
|---|---|
| BTL Listed | Yes |
| Mounting | DIN Rail |
| Power Supply | 24 VAC/DC |
| Poles | 3P, 4P |
| Standards | IEC 60947-2 |
Introduces the CBXi-8R8 and CBXi-8R8-H as programmable BACnet controllers.
Details applications for energy management and HVAC/electrical systems.
Explains IP as a standard for device communication over networks.
Covers IP addressing, DHCP, subnetting, and default gateways for network setup.
Defines port numbers, DNS, NAT, and WAN/segmentation for network functionality.
Defines BACnet as a data communication protocol for building automation.
Lists BACnet object types, services, and network types for device communication.
Explains BACnet topology, PIC statements, and BBMD for IP broadcasts.
Discusses MS/TP loading limits and reading multiple BACnet properties efficiently.
Displays controller status, firmware versions, and I/O status.
Configuration options for BACnet devices, networks, time sync, and IP settings.
Details powering the controller and connecting it to an IP network.
Explains the CBXi's 2-port integrated Ethernet switch for daisy-chaining.
Guides on configuring IP BACnet device properties using CXproHD.
Explains associating discovered devices with configured Site Devices in CXproHD.
Guides on finding the CBXi IP address using DHCP or default settings.
Configures IP ports for protocols and discusses SSL certificate management.
Configures the CBXi for MS/TP communications and IP network settings.
Details MS/TP cabling requirements and network termination procedures.
Connects FLX units and sets their unique addresses using DIP switches.
Sets the controller's clock via web UI or NTP time service.
Sets up Modbus RTU and IP connections via web UI and CXproHD.
Details the physical layout, dimensions, and wiring of the CBXi controller.
Describes the function and connection details of each terminal on the CBXi.
Explains the meaning of Red, Green, and Yellow LEDs for status indication.
Describes how Universal Input and UniPut terminals can be configured as inputs.
Details UniPut terminal outputs: Analog, Digital, and Relay modes.
Controls outputs via hardware override switches (Manual, Auto, Off).
Resets WebUI login, performs factory reset, or restarts the controller without power.
To Next Page