When scanning is complete, the Associate IP Devices dialog will open:
The Site Devices panel on the right lists all of the relevant IP devices configured in the CXproᴴᴰ Site that
have been successfully discovered on the BACnet network.
The Discovered Devices panel on the top left lists all of the relevant devices that have been discovered on the
network
The Associated Devices panel on the bottom left lists any Discovered Device that has been associated with a
configured Site Device.
How to Associate devices
To associate a Discovered Device with a Site Device, select a device in the Site Devices list and a device in
the Discovered Devices list and click the Associate button. Alternatively, you can drag the Site Device and drop
it over a Discovered Device.
Once this is done, the discovered device is moved to the Associated Devices list. The device on the Site PC is
updated with the Device Instance of the physical devices.
The MAC address will be stored in the site configuration as the key, so associations are maintained if the
tool is run again.
To Next Page
Loading...
