SET TIME AND DATE
On most networks, NTP is used to automatically keep the time and date correct. Enabling it generally
requires no additional configuration.
Some private networks may have an NTP server that cannot be automatically located. If so, check the Use
Custom Server box and enter the hostname of the NTP server if available. If an NTP server is not available,
the time can be manually set.
RESTART UTILITY
Several options are available for refreshing the CBXi platform, in case a condition has occurred which
stopped a portion of the functionality of the CBXi and you do not wish to reboot the entire CBXi platform.
• Choose Reboot Platform to cleanly shutdown the CBXi and then restart it. This is equivalent to rebooting
your PC.
• Choose Restart Strategy Engine to stop and restart the processing of the Strategy.
• Restart the BACnet Router and MSTP stops and restarts the internal BACnet Router and MS/TP network
engine.
To Next Page
Loading...
Need help?
General
