FBXi controllers are shipped with a self-signed certificate. If a new self-signed certificate is required, then
one can be created with the form on the IP Network > Edit SSL Cert page. If a signed certificate is required, then
a signing request can be generated on the IP Network > Sign SSL Cert page, based on the information entered
on the IP Network > Edit SSL Cert page.
The IP Network > Edit SSL Cert page allows you to enter the details for an SSL certificate, which can be applied
to the current FBXi as a self-signed certificate, or else these details can be used to generate a request for a
3
rd
-party SSL Cert on the IP Network > Sign SSL Cert page.
To Next Page
Loading...
