CONFIGURATIONS INITIAL VALUES – IP CONFIGURATION
1TGC908004M0201 31
—
7.Configurations
7.1. Initial Values – IP Configuration
MNS Digital Gateway requires parameter settings as initial values for network operation. The
parameters are required depending on MNS Digital Gateway configuration. Additionally
parameter for Web Server, OPC Server and Fieldbus are also required.
The parameters have to be loaded onto the Compact Flash (CF) card using MNavigate tool
before power up. After successful communication between MNavigate and MNS Digital
Gateway (either direct or via network) the parameters can then be changed from MNavigate
through the network.
Any change of communication related parameter for Ethernet network (e.g. IP
address) requires a restart of MNS Digital Gateway. Fieldbus communication related
parameter (e.g. comm. speed, or slave address) can be change during runtime of MNS
Digital Gateway.
IP Address LAN 2 (LAN2) 192.168.200.100
Settings according to network
administrator
Subnet Mask LAN2 255.255.255.0
Settings according to network
administrator
Broadcast Address LAN2 192.168.200.255 Calculated automatically
Default Gateway LAN2 0.0.0.0
Settings according to network
administrator
IP Address LAN 1 (LAN1) 192.168.100.100
Settings according to network
administrator
Subnet Mask LAN1 255.255.255.0
Settings according to network
administrator
Broadcast Address LAN1 192.168.200.255 Calculated automatically
Default Gateway LAN1 0.0.0.0
Settings according to network
administrator
IP Address LAN 3 (LAN3) 192.168.171.100 LAN 3 is not used
Subnet Mask LAN3 255.255.255.0 LAN 3 is not used
Broadcast Address LAN3 192.168.171.255 Calculated automatically
To Next Page
Loading...
